Do You Need a Regulator For a Solar Panel? (Here’s When)

Regulators otherwise known as solar controllers are a big part of a solar panel set-up, especially for whole-house and commercial units.

Since solar panels vary from handheld devices to mile-wide systems, there are variations in the setup and components required.

Typically for a solar panel set-up, you’ll need;

  • A Solar Panel or Set of Panels (depending on how much energy you hope to capture based on your needs)
  • A Battery or Battery Bank (depending on how much energy you need to store)
  • A Solar Regulator/Controller (to gauge and regulate the current flow between the two)

The most essential part of this combination is the solar panels and we’ll take a look to see if you need a regular.

Solar Regulator Charge Controller MTTP

What does a regulator do on a solar panel?

The solar panels collect the sun’s rays, and the batteries store the energy…. What else could you possibly need, right?

Well, the fact of the matter is that solar panels can essentially harness unlimited amounts of energy, BUT your battery bank isn’t usually capable of holding an infinite amount of energy.

That’s where a regulator comes in handy – it’s a piece of equipment installed between the panels and the battery that “regulates” the amount of energy flowing through and ensures that the system runs smoothly and does not overheat.

A solar charge regulator is generally part of a standard solar system and is an affordable piece of the puzzle to help your set-up function even when there are all sorts of watts and numbers to factor in.

Other common names for “solar charge regulators” are both “solar charge converters” and simply “charge controllers,” so feel free to use these terms interchangeably.

Where do you place a solar controller?

The solar controller is installed between the solar panel and the battery to regulate the energy flow.

A controller can be a part of the panel itself, but you’ll usually see it as a standalone gadget that both your panel and your batteries connect to during the set-up process.

See also: What A Solar Charge Controller Does (Explained)

Can I use a solar panel without a charge controller?

You can use a solar panel without a charge controller but it is not advisable. Without one it becomes a risk to the system and a potential hazard. There are exceptions when a controller is not required.

Connecting the panel directly to the battery without using some type of regulating mechanism is straightforward enough in terms of wiring.

However, neglecting to install a solar charge controller may lead to both electric surges as well as the danger of overcharging – and therefore ruining – the batteries in your battery bank.

It might sound counterintuitive, but you can actually overcharge batteries, and it is not ideal. Besides wasting the excess electricity, the battery itself contains fluids and acids that could be disturbed or overheated while it’s overcharging, and the entire battery could be destroyed due to this misuse.

You could actually have an explosion on your hands if you’re not careful!

Having a trustworthy charge controller installed between the panels and the batteries will make all your equipment run more efficiently and last longer overall.

There are however exceptions for smaller units that have in-built controllers and in this case, you wouldn’t need one.

Can a solar panel be connected directly to a battery?

Yes. Technically, the solar panel can be directly connected to the battery, and for small load set-ups, this is usually not a problem.

However, many panels exceed the definition of “small load” and would benefit from having a regulator installed to protect your investments.

Also, it’s important to note that regulators protect against reverse power flow occurrences which usually happen at night and deplete the energy you stored throughout the day.

This can be a critical feature that makes all the difference when your sunlight levels are minimal, or your load demand is high.

Do solar panels have built-in regulators?

Sometimes a solar panel will come equipped with a basic regulator affixed to the back, but this is often a feature on cheaper solar panel models only.

Most professionals prefer to install a separate solar charge regulator so that the current can be more closely and accurately monitored.

You can also purchase a handheld current gauge to test the output levels of your solar panels. This might be a convenient and handy tool for determining which type of regulator would work best based on your battery type and size.

What is the difference between a solar regulator and a solar controller?

As noted above, there is no major difference between the terms “regulator” and “controller” within solar set-ups. Professionals use both of these terms, along with “converter,” to describe the piece of equipment that sits between the panels and the batteries.

Sometimes the label on the box or product description simply depends on where the parts were developed or are manufactured, so don’t be confused by the various terms.

The important element is the function of the regulator you purchase for your solar system. Will it effectively control the current of energy leaving your solar panels and protect your batteries? If so, you’ve got the right piece of equipment!

Do I need a regulator for a 10w solar panel?

A nice, solid rule of thumb regarding your solar panel’s wattage is that if your panel is small maintenance or a “trickle-down” model (i.e. is a 1 – 5-watt panel), you do not need a regulator.

This is because watt outputs that low have little to no danger of overcharging or destroying your battery bank.

Be sure to check your solar panel’s watt outputs as you decide whether or not to install a solar charge regulator because it’s better to be safe than sorry!

Saving a few dollars on a solar regulator/controller might seem like a good idea to minimize your upfront costs, but it could cost you in the long term if you need to replace your batteries.

Some battery models, especially newer deep cell models, can cost MUCH more than a simple regulator, and you’ll definitely want to consider protecting your investment.

Sources:

  • https://www.altenergy.org/renewables/solar/DIY/solar-charge-controller.html
  • https://findanyanswer.com/do-i-need-a-solar-regulator
  • https://diysolarshack.com/can-a-solar-panel-overcharge-a-battery/
  • https://www.morningstarcorp.com/solar-charge-controllers

Photo of author
Author
Elliot has 20+ years of experience in renewable technology, from conservation to efficient living. His passion is to help others achieve independent off-grid living.

SolVoltaics is an affiliate and an Amazon Associate, we earn from qualifying purchases - at no extra cost to you.

FIND WHAT YOU'RE LOOKING FOR